Fulfill® Refill Kit – Hot Melt Adhesive Systems
The Nordson Fulfill® Retrofit Adhesive Refill Kit automates adhesive feeding in already-installed melters, reducing waste, downtime, and maintenance. Compatible with multiple melter models, it can supply up to four units at the same time.
Product Description
The system automates adhesive supply from a single or multiple feed container, helping eliminate common issues related to charring, empty melter tanks, and missing adhesive beads. In addition, it improves operational safety by reducing direct operator interaction with equipment while it is running.
The system automates adhesive supply from a feed container (single or multiple), eliminating frequent problems related to carbonization, melt tank voids and missing beads. It also allows for greater operational safety by reducing direct operator interaction with operating equipment.
Operational advantages:
-
Reduced adhesive waste and rejects due to poor sealing
-
Prevention of charring and adhesive degradation
-
Decreased downtime and maintenance costs
-
Adaptability to multiple melter models and different hose lengths
-
Ability to feed up to four melters simultaneously
-
Quick and easy configuration in the field
Compatibility with Nordson melters:
-
ProBlue 4, 7, 10, 10, 15, 30, 50
-
3100, 3400, 3500, 3500, 3700, 3860/3960 Series
-
Table 4, 6, 9, 14
-
DuraBlue and VersaBlue 25, 50, 100
-
AltaBlue 10/16, 30/50 (TS)
-
FM200 and Universal systems
Technical highlights:
| Specification | Detail |
|---|---|
| Adhesive formats | Pellets, pellets up to 12 mm, mini-flakes up to 12 x 12 mm |
| Max. transfer rate | Up to 275 kg/h (depending on adhesive type) |
| Hose lengths | 4 m, 9 m, 18 m |
| Air required | 17 to 30 CFM depending on length and transfer height |
| Minimum/maximum pressure | 2.75 - 6.9 bar (40-100 psi) |
| Air connection | 1/4” NPT, BSPP or G 1/4 female |
| Operating voltage | 100-240 V, single-phase |
| Container capacity (adhesive) | 40 kg (single feeding), 64 kg (multiple feeding) |
| Degree of protection | IP54 |
| Noise level | 76 dBA |
This kit is an efficient, adaptable and cost-effective option for modernizing adhesive management on demanding production lines. It is ideal for manufacturers looking to maintain their existing infrastructure while improving performance and reducing total cost of operation.
